|
Serious |
Consumer |
10 |
Sweden |
Category: Protective equipment Product: Dry suit inflation hoses - Flow restriction orifice Brand: SI TECH Name: Type/number of model: Model no: 30115-00800, 32120-30800, 32510-00800. The affected hoses are marked on the UNF 3/8” end with an alphanumeric 3-digit batch code. Batch no: Between VIE-YF8 (black insert) and YF9-ZBD (blue insert)
Batch number/Barcode: OECD Portal Category: Description: SI TECH dry suit inflation hoses containing a flow restriction orifice. Consumers will most likely have received the hose as an accessory when purchasing a new dry suit. The hoses containing the affected part were sold during the period: 26 June 2006 – 26 February 2009. The insert is black, blue or green.
Country of origin: Sweden
  |
Drowning
The product poses a risk of drowning because the flow restricting insert may dislodge from the hose and move to the second stage where it could cause an obstruction to the air flow. This could interfere with connected devices including the regulator. Airflow might therefore be reduced which could affect breathing when diving. One incident reported. |
Voluntary measures: Voluntary corrective actions taken by the manufacturer. |
Greece, |
Non-compliant protective clothing
Contact us
Do you want to have more information, don't hesitate to contact us:
E.S.F. ivzw
Bavikhoofsestraat 190 - 8531 Bavikhove - Belgium
Phone +32 56 70 11 03 -www.eu-esf.org - email: info@eu-esf.org
VAT: BE0454 000 382 - RPR Business Court Gent - Division Kortrijk
Transparency register EC: 91447653655-65
Disclamer ESFThe information contained in this communication (letter, e-mail, on the ESF website or in documents available for download on the ESF website or as attachment to letter or e-mail, etc..) is intended for guidance only and whilst the information is provided in utmost good faith and has been based on the best information currently available, is to be relied upon at the users own risk.ESF will not accept any direct or indirect liability deriving from it. No representations or warranties are made with regards to its completeness or accuracy and no liability will be accepted for damages of any nature whatsoever resulting from the use of or reliance on the information. The guidance is based on available legislation and information and the interpretation of that legislation/information by ESF. Each company based on its own decision-making process may decide to use the guidance in full, partially or not, as it suits its needs but no liability shall be attributable to ESF.
|